Posted in | Gas Analyzer

Analyzing Medical Gases with Handheld Oxygen Analyzers

The AII-2000 range or Palm O2 handheld oxygen analyzers from Analytical Industries offer a straightforward means for verifying oxygen and other medical gases used in medical or veterinary clinics. These low-cost, FDA-approved medical gas analyzers are equipped with sophisticated, maintenance-free galvanic oxygen sensors and can operate for up to 32 months.

With decades of expertise in the design and production of oxygen instrumentation for respiratory medical devices, both models have been particularly developed for the spot checking of oxygen levels in incubators, intensive care, anesthesia, or other variants of respiratory or oxygen therapy:

  • Maintenance-free oxygen sensors
  • Integral or remote sensor options
  • Very easy to operate
  • Long battery life: up to 18 months of continuous operation for AII-2000 Palm O2
  • O2 range of 0%–100%
  • Sensor lifetime of up to 32 months

Handheld Oxygen Analyzers for Medical Gases

Handheld Oxygen Analyzers for Medical Gases

Technical Specifications

  AII-2000 A (and AHC) AII-2000 M AII-2000 Palm R AII-2000 Palm O2
Measurement range 0-100% oxygen
Accuracy < ±2% of range at constant conditions
Response time T90 < 10 seconds
Sensitivity (LDL) 0.1%
Linearity < 2% of scale
Sensor AII-11-60 (A model) or AII-11-60-HC (HC model) AII-11-60 AII-11-75-PO2R
Sensor life at 25 °C (77 °F) and 1 atm 60 months in air 32 months in air
Calibration interval After 8 hours of use
Inlet pressure Ambient
0.34-2 barg (5-30 psig) with atmospheric vent
Flow rate 0.2-10 l/m (0.4-20 SCFH)
Gas connections 1x16 mm thread or push-in flow diverter with o-ring seal
Display 3½ digit backlit LCD 7 x 3.5 cm (2.75 x 1.375"); resolution 0.1 3 digit LCD 2.8 x 1.6 cm (1.1 x 0.625"); resolution 0.1
Dimensions 9.1 x 14.9 x4 cm (3.6 x 5.9 x 1.6") 6.9 x 10.4 x 3.4 cm (2.72" x 4.1" x 1.35")
Weight 280 g (10 oz) 196 g (7 oz)
Compensation Temperature
Alarms None User configurable
HI & LOW alarms
None
LED indicators None Alarm status None
Storage temperature 0° to 45°C (32 °F to 113 °F) on intermittent basis -20° to 60 °C (-4 °F to 140 °F) on intermittent basis
Operating temperature 5° to 45 °C (41 °F to 113 °F)
Humidity Non-condensing 0-95% RH
Power 2 AA Alkaline batteries;
1,200 hours continuous use
2 AA alkaline batteries; 13,000 hours continuous use

Other Equipment by this Supplier