Multisensor Inner Diameter Measurement System from Riftek

The Multisensor Inner Diameter Measurement System from RIFTEK has been designed specifically for non-contact measurement of the inner diameter of gun barrels, as well as cylindrical and taper pipes. The system can also be used on the production line as a quality control tool.

RF040-65/115

 

                                                       

                                  See detailed specifications

RF040-95/195-160/300          

                                                                                               See detailed specifications


RF040-100/150-Wi-Fi


 See detailed specifications


 Operation

Operation of the system is based on the hole surface coordinates measurement by point laser triangulation sensors. The system contains 3-6 point laser triangulation sensors located circumferentially in one housing at known fixed angles (see Figure 1).

Figure 1. The system with six laser sensors. 

The system operates as follows.
The measurement system is inserted into the pipe and moved by translation module to the definite position. Laser sensors measure distances to the inner surface. Software calculates inner diameter of the pipe.

Overall and mounting dimensions are shown in Figure 2.

Figure 2. Overall and mounting dimensions. 

 

 

Find detailed information about this device here.

Other Equipment by this Supplier