Obtain Precise and Consistent Data on Assets with the CONMONSense Range

SDT’s CONMONSense Ultrasound Sensor is an independent, permanent mount sensor that is capable of integrating with usual industrial measuring systems.

CONMONSense offers accurate, persistent information on the health of the assets and electrical systems even under the hardest conditions.

The resonant piezo element present is fabricated for mechanical fault detection, ultrasound-assisted lubrication, and steam, valve, hydraulic and electrical defect monitoring.

A trustworthy indicator of the facility’s FITness is ultrasound. As for defect indications, the majority of the assets develop turbulence, friction and impact. CONMONSense identifies these events instantly and sends an analog signal to the connected measuring equipment.

CONMONSense has an output range from 4–20 mA or 0–10 V and mounts persistently to any asset to offer continuous condition monitoring data.

CONMONSense helps avoid unplanned downtime and also safeguards the plant and the colleagues.

With an output range from 4-20 mA or from 0-10 V, CONMONSense mounts permanently to any asset to give continuous condition monitoring data. Use CONMONSense to avoid any unplanned downtime and put the safety of the plant and colleagues first.

Three Types of Sensors

CONMONSense Contact Sensor

Permanent contact/structure (IP65) sensor helps monitor valves, bearings, hydraulics systems, steam traps and rotating assets, even the slowest ones.

CONMONSense Contact Sensor

Image Credit: SDT Ultrasound Solutions

CONMONSense Airborne Sensors

CONMONSense Airborne is obtainable in enclosed (IP65) and open (IP40) versions for an electrical system inspection.

CONMONSense Airborne Sensors

Image Credit: SDT Ultrasound Solutions

It offers continuous condition monitoring data by permanently connecting to any asset. The three sensors are available with an output range of 0–10 V or 4–20 mA based on the device that it is hooked to.

The sensors fitted with 4–20 mA output can be utilized along with compatible industrial measurement systems that measure voltage or current like PLC measurement modules, data acquisition boards, SCADA and DCS systems.

The sensors equipped with 0–10 V output are designed particularly for use with Vigilant.

CONMONSense helps avoid unplanned downtime and prioritizes the safety of the facility and employees.

Obtain Precise and Consistent Data on Assets with the CONMONSense Range

Image Credit: SDT Ultrasound Solutions

The sensor is designed to facilitate accurate and repeatable measurements to continuously monitor the health of the electrical cabinet, along with prioritizing the safety of the facility and colleagues.

Specifications for Each Sensor

4–20 mA Contact Sensor IP65/0–10 V Contact Sensor IP65

Table 1. Source: SDT Ultrasound Solutions

. .
Weight 126 g / 4.44 oz
IP rating 65
Power supply 10 [V] to 30 [V]
Operating T° -20 [°C] to +85 [°C] / -4 [°F] to +185 [°F]
Pinout voltage GROUND to VDD
Resonant frequency 37 [kHz] +/- 1 [kHz]
Gain range 0 [dB] to 60 [dB]
Gain step 12 [dB]
Connector size M8 - 4 pin
Heterodyne frequency 38.5 [kHz] +/- 1 [kHz]
Bandwidth [0.25 – 4] [kHz], image of the ultrasonic signal
RMS time period 1 [s] (static mode only)

 

4–20 mA Airborne Enclosed Sensor IP65/0–10 V Airborne Enclosed Sensor IP65

Table 2. Source: SDT Ultrasound Solutions

. .
Weight 102 g / 3.6 oz
IP rating 65
Power supply 10 [V] to 30 [V]
Operating T° -20 [°C] to +85 [°C] / -4 [°F] to +185 [°F]
Pinout voltage GROUND to VDD
Resonant frequency 40 [kHz] +/- 1 [kHz]
Gain range 0 [dB] to 60 [dB]
Gain step 12 [dB]
Connector size M8 - 4 pin
Heterodyne frequency 38.5 [kHz] +/- 1 [kHz]
Bandwidth [0.25 – 4] [kHz], image of the ultrasonic signal
RMS time period 1 [s] (static mode only)

 

4–20 mA Airborne Open Sensor IP40/0–10 V Airborne Open Sensor IP40

Table 3. Source: SDT Ultrasound Solutions

. .
Weight 135 g / 4.8 oz
IP rating 40
Power supply 10 [V] to 30 [V]
Operating T° -20 [°C] to +85 [°C] / -4 [°F] to +185 [°F]
Pinout voltage GROUND to VDD
Resonant frequency 40 [kHz] +/- 1 [kHz]
Gain range 0 [dB] to 60 [dB]
Gain step 12 [dB]
Connector size M8 - 4 pin
Heterodyne frequency 38.5 [kHz] +/- 1 [kHz]
Bandwidth [0.25 – 4] [kHz], image of the ultrasonic signal
RMS time period 1 [s] (static mode only)

 

Other Equipment