Posted in | Medical Sensor

ams Introduces Ultra-Thin Sensor Bringing New Blood-Oxygen Monitoring Capability to Earbuds, Patches, and Other Wearable Devices

ams, a leading worldwide supplier of high performance sensor solutions, today introduces the industry’s thinnest dedicated sensor for blood oxygen saturation (SpO2) measurement, bringing the capability to remotely monitor this vital sign to small consumer products such as earbuds, smart watches and wristbands, as well as to medical devices such as patches and oximeters.

The high performance of the new AS7038RB also means that it is suitable for innovative applications in remote diagnostic equipment, such as disposable patches used for SpO2 and electro-cardiogram (ECG) measurement in hospital emergency rooms. This gives medical teams and patients greater flexibility to choose how, where and when measurements of these vital signs are taken using non-invasive methods for fast response.

In fact, a growing body of evidence suggests that low SpO2 is an early symptom of the COVID-19 disease before the onset of breathing difficulty in some at-risk patients. The development of a wearable SpO2 measurement device based on the AS7038RB can be used remotely and therefore help in the treatment of people infected with the SARS-CoV-2 virus.

Wim Renirie, Vice President and General Manager for the Accessory and Wearable Solutions Business Line at ams, said: “The introduction of the AS7038RB marks another ams breakthrough in technology for remote diagnostics. ams is working actively with a range of partners to develop innovative solutions for the testing and diagnosis of COVID-19. The AS7038RB offers an additional diagnostic tool, enabling the creation of wearable and disposable equipment for monitoring blood oxygen saturation accurately and safely, without requiring the presence of a medical practitioner.”

Small form factor and high integration for use in space-constrained designs

The AS7038RB’s combination of small size, integrated functionality, and a high-performance signal chain makes it ideal for OEMs that are developing innovative applications for health monitoring in space-constrained consumer or medical products. The sensor, housed in a package with a footprint of 3.70 mm x 3.10 mm and which is just 0.65 mm thin, integrates a highly sensitive photodiode, four LED drivers, an analog front end, and a sequencer. It is supplied with application software for SpO2 and heart rate measurement. The analog front end also supports concurrent ECG measurement complying with the requirements of the IEC 6060-2-47 medical standard.

The accuracy of the AS7038RB’s SpO2 measurements, very closely matching the outputs from medical-grade pulse oximeters used in hospital testing facilities, is in part due to the unique on-wafer interference filter technology developed by ams. The filter enables the AS7038RB to capture optical signals in the 590 nm-710 nm and near infrared (800 nm-1050 nm) wavelength bands of interest for SpO2 measurement, while blocking interference from ambient light at other wavelengths.

When combined with ams’ high-sensitivity photodiode, which has a large light-sensitive area of 2.5 mm2, this produces a very high optical signal-to-noise ratio. This eases implementation in optically challenging applications such as disposable chest patches, wristbands, and smart watches.

Innovative flexible implementation allows use in a wide range of applications

The AS7038RB’s provision of drivers for up to four external LEDs gives OEMs the flexibility to place the LEDs in the best position for the application. This means LED placement can be optimized for the different skin thicknesses and bone structure at the wrist, chest, forehead, finger, etc.

The sensor’s high sensitivity and high signal-to-noise ratio enable it to operate effectively with a low optical power output from the LEDs. The integrated LED drivers provide for adjustment of the drive current, so the OEM can balance system power consumption and measurement performance, helping to extend run-time between battery charges in devices such as earbuds, which contain a small battery power source.

The AS7038RB is available for sampling now and goes into mass production in October.

For sample requests or more technical information about the AS7038RB SpO2 sensor, go to https://ams.com/AS7038RB.

Source: https://ams.com

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    ams AG. (2020, September 18). ams Introduces Ultra-Thin Sensor Bringing New Blood-Oxygen Monitoring Capability to Earbuds, Patches, and Other Wearable Devices. AZoSensors. Retrieved on October 20, 2020 from https://www.azosensors.com/news.aspx?newsID=14092.

  • MLA

    ams AG. "ams Introduces Ultra-Thin Sensor Bringing New Blood-Oxygen Monitoring Capability to Earbuds, Patches, and Other Wearable Devices". AZoSensors. 20 October 2020. <https://www.azosensors.com/news.aspx?newsID=14092>.

  • Chicago

    ams AG. "ams Introduces Ultra-Thin Sensor Bringing New Blood-Oxygen Monitoring Capability to Earbuds, Patches, and Other Wearable Devices". AZoSensors. https://www.azosensors.com/news.aspx?newsID=14092. (accessed October 20, 2020).

  • Harvard

    ams AG. 2020. ams Introduces Ultra-Thin Sensor Bringing New Blood-Oxygen Monitoring Capability to Earbuds, Patches, and Other Wearable Devices. AZoSensors, viewed 20 October 2020, https://www.azosensors.com/news.aspx?newsID=14092.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit