Posted in | News | Light / Image Sensor

3D Inspection Machine 3D Inspection Machine

RIFTEK: These projects continue RIFTEK work in solving widespread 3D measurement challenges and is intended for non-contact measurement of geometric parameters of steel band rims used in the tire industry.

Operation of the machine is based on the scanning of the rims inner surface by rotating 2D laser sensor (special design of RF627 scanner). Measurements are taken on a conveyor. On the command of outer controller laser sensor moves into the control rim. The sensor rotates and scans rim inner surface. Polar coordinates of the surface (distance from the rotation axis, measured by the sensor and a corresponding angle of rotation) are transmitted to the computer for calculating the required geometric parameters.

Main parameters are:

  • Measured ID range, mm: 100…250
  • Measured height range, mm: 70…305
  • Measurement accuracy, um: ±50
  • Measured parameters: diameter, roundness, chambers width and angle 
  • Interface to PLC: PROFINET

As usual, the parameters of the machine can be changed for a specific task.

Detailed Manual is available here.

Demo video is available here.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    RIFTEK LLC. (2021, August 10). 3D Inspection Machine 3D Inspection Machine. AZoSensors. Retrieved on September 28, 2021 from https://www.azosensors.com/news.aspx?newsID=14612.

  • MLA

    RIFTEK LLC. "3D Inspection Machine 3D Inspection Machine". AZoSensors. 28 September 2021. <https://www.azosensors.com/news.aspx?newsID=14612>.

  • Chicago

    RIFTEK LLC. "3D Inspection Machine 3D Inspection Machine". AZoSensors. https://www.azosensors.com/news.aspx?newsID=14612. (accessed September 28, 2021).

  • Harvard

    RIFTEK LLC. 2021. 3D Inspection Machine 3D Inspection Machine. AZoSensors, viewed 28 September 2021, https://www.azosensors.com/news.aspx?newsID=14612.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit