Posted in | News | Light / Image Sensor

Flat Washers (Spacers) Thickness Measurement System

This Machine is developed on the order of one of our Russian customer which is a lead designer and manufacturer of the thermoelectric modules.

​​​​​​Image Credit: RIFTEK

Assigned Task

The task was to develop and to produce precision automatic machine for contactless measurement of thickness of spacers used in production of thermoelectric modules.

Result

The result of our work you can see in the demo video and by downloading Spacers Thickness Measurement Machine Manual from our website.

The main features of the Machine are:

Image Credit: RIFTEK

​​​​​​​

Note: machine parameters can be changed for the specific task.

Operation of the machine is based on the principle of laser scanning of the spacer by two laser triangulation point sensor, located on the opposite sides of the spacer. When the spacer is in the measuring zone, it is rotated and translated and, as a result, the thickness is measured in a spiral on the spacer surface, which allows registering the extended surface defects.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    RIFTEK LLC. (2021, August 11). Flat Washers (Spacers) Thickness Measurement System. AZoSensors. Retrieved on September 28, 2021 from https://www.azosensors.com/news.aspx?newsID=14627.

  • MLA

    RIFTEK LLC. "Flat Washers (Spacers) Thickness Measurement System". AZoSensors. 28 September 2021. <https://www.azosensors.com/news.aspx?newsID=14627>.

  • Chicago

    RIFTEK LLC. "Flat Washers (Spacers) Thickness Measurement System". AZoSensors. https://www.azosensors.com/news.aspx?newsID=14627. (accessed September 28, 2021).

  • Harvard

    RIFTEK LLC. 2021. Flat Washers (Spacers) Thickness Measurement System. AZoSensors, viewed 28 September 2021, https://www.azosensors.com/news.aspx?newsID=14627.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit