Posted in | News | Light / Image Sensor

NEW! Laminated Tubes Geometry Measurement System

The machine is designed for contactless scanning and geometrical parameters measurement of laminated tubes, made of PBL and ABL foil. Application of the machine: large-scale production.

 

​​​​​​​

Image Credit: RIFTEK

Operation of the machine is based on the principle of laser scanning of tube surfaces by rotating triangulation laser point sensors.

​​​​​​​​​​​​​​

Image Credit: RIFTEK

The machine operates as follows. The tube is placed in measurement position under laser sensors. The linear translation system lets down laser sensors. During the translation one sensor determines the tube edge position as a start of tube length measurement. After registration of tube upper edge the system translates sensors into position of tube shape control. During rotation sensors measure distances to tube inner and outer surfaces. The data are transmitted to PC where foil thickness, weld parameters and tube shape are calculated. After completing a full revolution the system lets down laser sensors and it measures tube length. Sensors are raised to upper position and measurement cycle repeats for the next tube.

Main features:
• Measured ID range 13…50 mm
• Measurement accuracy ±10 um
• Foil thickness range 0,05…0,5 mm
• Thickness measurement accuracy ±5 um

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    RIFTEK LLC. (2021, August 11). NEW! Laminated Tubes Geometry Measurement System. AZoSensors. Retrieved on September 28, 2021 from https://www.azosensors.com/news.aspx?newsID=14647.

  • MLA

    RIFTEK LLC. "NEW! Laminated Tubes Geometry Measurement System". AZoSensors. 28 September 2021. <https://www.azosensors.com/news.aspx?newsID=14647>.

  • Chicago

    RIFTEK LLC. "NEW! Laminated Tubes Geometry Measurement System". AZoSensors. https://www.azosensors.com/news.aspx?newsID=14647. (accessed September 28, 2021).

  • Harvard

    RIFTEK LLC. 2021. NEW! Laminated Tubes Geometry Measurement System. AZoSensors, viewed 28 September 2021, https://www.azosensors.com/news.aspx?newsID=14647.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit