Posted in | Sensors General

New Industrial Measurement Amplifier from HBM for Measuring Torque and Angle with no Programming

HBM, Inc., a leading manufacturer of data acquisition systems, analysis and calibration software, strain gauges, and transducers and sensors, has introduced a new industrial measurement amplifier that enables users to make precise, dynamic measurements of raw and filtered torque, frequency, pulse, speed, and angle of rotation. It is the only amplifier that allows users to make accurate, position-based torque measurements that can be used directly by dynamometers and industrial control systems.

 

Measuring torque

 Image credit: Hottinger Baldwin Messtechnik GmbH

 

The combination of the new PX460 hardware with HBM’s APM (Advanced Plug & Measure) technology and Transducer Electronic Data Sheet (TEDS) platform for sensor integration means that now users can simply just connect torque sensors to the PX460 amplifier and get started right away with no programming.

The PX460 amplifier is a plug-in module for the HBM PMX data acquisition and control system. It can acquire up to four channels of data from torque transducers simultaneously with an analog bandwidth of up to 6 kHz.  In addition to powering the torque transducer directly, the PX460 can also acquire encoder signals of up to 2 MHz with absolute precision in rough industrial environments. The PX460 interfaces with most reaction arm-based dynamometers, providing them with filtered and smooth torque updates in real time at the desired control loop rate of the dynamometer.

Available measurement modes include:

Up to four torque flanges (T10, T12, T40) for torque or rotational speed measurement (without detection of the direction of rotation).
Two measurement channels for simultaneous measurement, for rotational speed and angle of rotation (with detection of the direction of rotation).
One measurement channel for simultaneous measurement, for rotational speed and angle of rotation or reference signal recognition.
Two angular/incremental encoders each, SSI, PWM sensors, magnetic transducers or pulse counters.
Four measurement channels for frequency measurement up to 2 MHz.

“Combining our PMX industrial amplifier with our advanced torque transducers is a powerful offering for customers, meaning they no longer have to choose between measurement performance and plug-and-play simplicity,” said HBM’s Michael Guckes, Product and Application Manager for Industrial Amplifiers.

Using an on-board, position-based CASMA filter, the PX460 smooths the torque measurements so that they can be fed directly into a dynamometer or machine control system using real time fieldbuses, such as Profinet®, Ethercat®, Ethernet IP®, or by using an analog output.

HBM’s PMX data acquisition and control system is a web-based system that uses APM technology, as well as its TEDS platform for easy sensor integration.  The PMX system automatically recognizes sensors that are connected to the system and enters the correct settings for those sensors, so that it can begin making measurements immediately.  As a result, users spend less time setting up the system, the system is more stable, and there are fewer sources of measurement error.

More information can be found at http://www.hbm.com/en/menu/products/industrial-amplifiers/pmx/

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Hottinger Baldwin Messtechnik GmbH (HBM). (2020, May 12). New Industrial Measurement Amplifier from HBM for Measuring Torque and Angle with no Programming. AZoSensors. Retrieved on June 01, 2020 from https://www.azosensors.com/news.aspx?newsID=8151.

  • MLA

    Hottinger Baldwin Messtechnik GmbH (HBM). "New Industrial Measurement Amplifier from HBM for Measuring Torque and Angle with no Programming". AZoSensors. 01 June 2020. <https://www.azosensors.com/news.aspx?newsID=8151>.

  • Chicago

    Hottinger Baldwin Messtechnik GmbH (HBM). "New Industrial Measurement Amplifier from HBM for Measuring Torque and Angle with no Programming". AZoSensors. https://www.azosensors.com/news.aspx?newsID=8151. (accessed June 01, 2020).

  • Harvard

    Hottinger Baldwin Messtechnik GmbH (HBM). 2020. New Industrial Measurement Amplifier from HBM for Measuring Torque and Angle with no Programming. AZoSensors, viewed 01 June 2020, https://www.azosensors.com/news.aspx?newsID=8151.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit