When using the proper amount of CO2 each time, the CO2 Controller for Grow Rooms is made to optimize plant yields and assist growers in saving money. This gadget works perfectly in hydroponic farms, grow rooms, indoor greenhouses, mushroom farms, and other settings where higher CO2 levels optimize plant growth.
Features
- Automatic shut-off during dark times reduces CO2 emissions.
- Built-in temperature, humidity, and light sensors
- Dual mode for greenhouse or mushroom applications
- Controls up to two zones (suitable for small or big facilities)
- Configurable user interface for controlling CO2 tank and regulator
- Adjust CO2 setpoints for high and low levels
Top 4 Benefits of Using a CO2 Grow Controller
Video Credit: CO2Meter
Specification
- Measurement Range: 0-3000 ppm CO2
- CO2 Sensing Method: Non-dispersive Infrared (NDIR)
- Target Gas Ranges: 0-2,000 ppm and 0-5,000 ppm
- Measurements: Requires 1 liter per minute of constant flow per channel
- Resolution: 1 ppm @ 0-1,000 ppm; 10 ppm above 1000 pm
- Dimensions: 4.96×6.70×2.65 inches
- Accuracy: ±70 ppm or ±5% CO2
- Sensor Response Time: < 2 minutes
- Operating Temperature: –20 °C to 60 °C
- Sensor Cables: CAT5e
- Relays: 2 relays, either (Normally Open) NO or (Normally Closed) NC
Electrical
- Power: Adapter 110/220 VAC
- Power Consumption: 1 W max @ 115 VAC 60 Hz | 2 W max @ 230 VAC 50 Hz
- Power Supply: <5 A @ 250 VAC, SPST
Included
- (1) Indoor CO2 Controller
- (2) Remote CO2 Sensors
- (2) Relay Cables
- (2) CAT5e Cables – 25’ ft.
- (1) Wall Plug Safety Strap
- (1) Mounting Bracket
- (6) Screws
- (1)110/220 VAC Power Supply
- (3) International Power Adapters
Accessories
Solenoid Safety Shut-Off Valve SV-1029
Through the relay connection, the 3/8-inch solenoid valve is intended to turn the CO2 tank regulator valve on and off. There is a power supply included.