Posted in | Pressure Sensor

Honeywell’s New Subminiature Pressure Transducers Provide Measurement Range of 100-15000 psi

Featuring 1% accuracy, Honeywell Sensing and Control’s Model S Series of subminiature pressure transducers fit into tight spaces with little clearance, and accurately measure pressure ranges from 100 psi to 15000 psi.

Model S Series of subminiature pressure transducers

These rugged transducers are designed to handle high pressure and temperatures, with a high natural frequency and flush diaphragm for applications such as engine and transmission test stands, pressure brake testing, and hydraulic sensor testing.

Honeywell’s full line of subminiature pressure transducers accurately measure pressure ranges from 100 psi to 15000 psi. These gage-only subminiature pressure transducers have a high natural frequency and utilize a flush diaphragm that is manufactured from 17-4 PH Stainless Steel. Temperature compensation is accomplished by using temperature-sensitive components located inside the transducers. These transducers have a small electrical zero balance circuit board which is in the lead wire (approximately 1 in x 0.087 in thick). This balance board does not have to be in the same temperature as the transducers. All transducers have four (4) active bonded strain gages arranged in a Wheatstone-bridge configuration.

Honeywell offers a full line of lightweight subminiature pressure transducers which feature a compact, flush mount, low profile design and flush diaphragm enabling them to fit into extremely small spaces with tight clearances. The unitized stainless steel design, with a thin diaphragm and heavy sidewalls constructed from one piece of stainless steel, makes these sensors very rugged, yet thin enough to measure low pressures. Honeywell’s wet/wet subminiature differential pressure sensors offer a high degree of accuracy and pressure measurement ranges from 5 psid to 2000 psid. Their small size, bidirectional overload protection, wide temperature compensation and high natural frequencies make them uniquely suited to aerospace, chemical or nuclear applications.

Specifications:

  • Range - 100 psig to 15000 psig
  • Accuracy - 1.0 % FS BFSL
  • Media - Gases, liquids compatible with wetted parts
  • OutPut - 2 mV/V
  • Temperature, Operating - -54 °C to 149 °C [-65 °F to 300 °F]
  • Temperature, Compensated - 16 °C to 71 °C [60 °F to 160 °F]
  • Temperature Effect, Zero - 0.01 % FS/°F
  • Temperature Effect, Span - 0.02 % reading/°F
  • Electrical Termination - Four twisted leads (1.83 m [5 ft]) with external balance board
  • Mating Connector - None
  • Overload, Safe - 50 % over capacity
  • Overload, Burst - 400 % full scale
  • Wetted Parts Material - 17-4 PH Stainless Steel
  • Case Material - Stainless Steel

Honeywell offers a broad portfolio of sensors which meet industry standard approvals such as ATEX, CSA, and more, and are built tough to provide enhanced reliability, accuracy, and versatility in a wide range of test and measurement applications. Honeywell’s test and measurement sensor solutions help customers worldwide in research and development, design, quality testing, manufacturing and system monitoring in many different industries, challenging applications, and rugged environments. Customized solutions are also available, so stop by the Honeywell booth for more information and to discuss your application.

More information, images and data sheet are available at https://measurementsensors.honeywell.com/Pages/Product.aspx?pid=S

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Honeywell Sensing and Internet of Things. (2019, February 24). Honeywell’s New Subminiature Pressure Transducers Provide Measurement Range of 100-15000 psi. AZoSensors. Retrieved on August 13, 2020 from https://www.azosensors.com/news.aspx?newsID=6247.

  • MLA

    Honeywell Sensing and Internet of Things. "Honeywell’s New Subminiature Pressure Transducers Provide Measurement Range of 100-15000 psi". AZoSensors. 13 August 2020. <https://www.azosensors.com/news.aspx?newsID=6247>.

  • Chicago

    Honeywell Sensing and Internet of Things. "Honeywell’s New Subminiature Pressure Transducers Provide Measurement Range of 100-15000 psi". AZoSensors. https://www.azosensors.com/news.aspx?newsID=6247. (accessed August 13, 2020).

  • Harvard

    Honeywell Sensing and Internet of Things. 2019. Honeywell’s New Subminiature Pressure Transducers Provide Measurement Range of 100-15000 psi. AZoSensors, viewed 13 August 2020, https://www.azosensors.com/news.aspx?newsID=6247.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit