Boiler Efficiency Maximized By Stainless Steel Conductivity Sensors

The rugged CS675 and CS676 Stainless Steel Conductivity Sensors from Sensorex are ideal for highly accurate, reliable monitoring of impurities in boiler water, reducing blow down maintenance cycles and lowering boiler operating, repair and energy costs.

As boilers operate, pure water leaves the water in the form of steam and dissolved solids accumulate in the remaining water. If left unwatched and unregulated, these dissolved solids can cause boiler corrosion and contamination and lead to inaccurate boiler operation.

Boiler blow down maintenance is a process that helps prevent solids from building up by removing contaminated water and replacing it with fresh water. Careful monitoring of boiler water quality is necessary to ensure that blow downs are performed at the proper intervals, maintaining boiler accuracy while conserving water and energy. The amount of dissolved solids in boiler water can be determined by measuring the ability of the water to conduct electricity.

The heavy-duty Sensorex CS675 and CS676 Conductivity Sensors feature bodies and pins constructed of 316 stainless steel and are built to withstand rugged operating conditions up to 200°C and 250 psig. The sensors feature a special, thermally resistant PEEK insert and high-temperature ethylene propylene “O” rings. Models may be ordered with or without automatic temperature compensation depending upon application requirements.

Sensorex’s CS675 and CS676 boiler conductivity sensors use ¾-inch male NPT threads. The CS675 sensor family can be used in ¾” FNPT tees or crosses while the longer CS676 sensors are designed for use in 1” FNPT tees and crosses with use of a ¾” reducer to complete the installation. All boiler probes are supplied with 6-inch Teflon coated leads for Junction Box connection and extension and offer a standard cell K value of 1.0, with special K values of 0.1 and 10.0 also available. Longer cable lengths can be specified at additional cost.

Sensorex was founded in 1972 to manufacture quality sensors for water applications.  The company today is a leader in sensor technologies and systems, manufacturing more than 2,000 different sensor packages.Our mission is to provide customers with quality pH, ORP, Conductivity, Dissolved Oxygen, Free Chlorine, Chlorine Dioxide, and other specialty sensors as well as a full line of sensor accessories and knowledgeable customer service. For more information contact www.sensorex.com

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Sensorex Corporation. (2019, February 24). Boiler Efficiency Maximized By Stainless Steel Conductivity Sensors. AZoSensors. Retrieved on April 03, 2020 from https://www.azosensors.com/news.aspx?newsID=3343.

  • MLA

    Sensorex Corporation. "Boiler Efficiency Maximized By Stainless Steel Conductivity Sensors". AZoSensors. 03 April 2020. <https://www.azosensors.com/news.aspx?newsID=3343>.

  • Chicago

    Sensorex Corporation. "Boiler Efficiency Maximized By Stainless Steel Conductivity Sensors". AZoSensors. https://www.azosensors.com/news.aspx?newsID=3343. (accessed April 03, 2020).

  • Harvard

    Sensorex Corporation. 2019. Boiler Efficiency Maximized By Stainless Steel Conductivity Sensors. AZoSensors, viewed 03 April 2020, https://www.azosensors.com/news.aspx?newsID=3343.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit