Feb 12 2013
Vishay Intertechnology, Inc. today announced its "Super 12" featured products for 2013.
Each year, Vishay's Super 12 collection showcases the company's industry-leading capabilities in semiconductor and passive devices, providing design engineers with a shortcut to leading industry specs and a cross-section of Vishay's very broad product portfolio.
The Super 12 products for 2013 are:
VCNL3020 Fully Integrated Proximity Sensor -- Combines an IR emitter, photo-pin-diode, signal processing IC, and 16-bit ADC in one small surface-mount package. The sensor supports an easy-to-use I2C bus communication interface and features an interrupt function.
WSBM8518 Power Metal Strip® Battery Shunt Resistor -- Features a molded enclosure with a 4-pin female connector for easy PCB connection to the shunt resistor assembly. With extremely low resistance of 100 micro-ohms, the device provides increased accuracy for battery management in automotive and industrial applications.
170 V TMBS® Trench MOS Barrier Schottky Rectifiers -- For telecom power supplies, these rectifiers offer a wide range of current ratings from 10 A to 80 A and extremely low forward voltage drops down to 0.65 V in the TO-220AB, TO-263AB, and TO-3PW power packages.
MCW 0406 AT Professional and Precision Series of Wide-Terminal Thin Film Chip Resistors -- AEC-Q200-qualified devices combine high power ratings to 300 mW and advanced levels of precision -- with tolerances to 0.1 %, TCR of 25 ppm/K, and ohmic values down to 1 ohm -- for automotive and industrial electronics.
TrenchFET® Gen IV Power MOSFETs -- Utilize a new high-density design for ultra-low on-resistance down to 1.0 milliohm at 10 V and 1.35 milliohms at 4.5 V, and exceptionally low Qgd/Qgs ratio of less than 0.5 in the PowerPAK® SO-8, PowerPAK 1212-8, and PowerPAIR® packages.
IHLP-6767GZ-5A IHLP® Low-Profile, High-Current Inductor -- Vishay's largest IHLP power inductor available, this device features + 155 °C continuous operation and high currents up to 53 A at 1.0 microhenry for automotive applications.
eSMP® SlimSMA™ and SMPD Packages -- Ideal for consumer, computer, industrial, telecommunications, and automotive applications, rectifiers and transient voltage suppressors (TVS) in the SlimSMA DO-221AC package offer a ultra-low 0.95 mm profile, while devices in the SMPD package feature a typical height of 1.7 mm.
LPS 1100 Power Thick Film Resistor -- For windmill turbines and braking systems, the device is the industry's first power thick film resistor in a compact 57 mm by 60 mm package to offer a power rating of 1100 W at + 25 °C.
E Series High-Voltage MOSFETs -- Based on Vishay's next generation of Super Junction Technology, the 600 V and 650 V MOSFETs offer 30 % lower specific on-resistance and improved gate charge in TO-220 FullPAK, TO-247AC/AD, D2PAK, DPAK, IPAK, and PowerPAK 8x8 packages.
T16 Wet Tantalum Capacitor -- A tantalum-cased device with a glass-to-tantalum hermetic seal, the T16 offers enhanced performance with a reverse voltage of 1.5 V at + 85 °C and a high-reliability design.
SiP32458/SiP32459 Slew Rate Controlled Load Switches -- Offered in the tiny 1 mm x 1.5 mm WCSP package, the high-side load switches operate in the 1.5 V to 5.5 V voltage range, and provide flat, low 20-milliohm on-resistance in the 3 V to 5.5 V range.
VJ HIFREQ Series of Surface-Mount Multilayer Ceramic Chip Capacitors (MLCC) -- Available in 0402, 0603, and 0805 case sizes, the devices feature a high Q factor of greater than 2000 and a low dissipation factor of less than 0.05 %.
Source: http://www.vishay.com/